Ntak79 switches – Nortel Networks Circuit Card User Manual

Page 748

Text mode
Original mode

NTAK79 2.0 Mb PRI card

553-3001-211 Standard 3.00 August 2005

NTAK79 switches

The NTAK79 card incorporates four on-board dip switches. The tables that
follow provide information on the various settings and related functions of
these switches.

Note: The ON position for all the switches is towards the bottom of the
card. This is indicated by a white dot printed on the board adjacent to the
bottom left corner of each individual switch.

DCH

On (Red)

DCH is switched on and disabled.

On (Green)

DCH is switched on and enabled, but not necessarily
established.

Off

DCH is switched off.

Table 239
NTAK79 LEDs (Part 3 of 3)

LED

State

Definition