Nortel Networks Circuit Card - Manual (Page 331)

NT5D97 Dual-port DTI2/PRI2 card Page 331 of 906
Circuit Card Description and Installation
NT8D7217 (A0617192)
The NT8D7217 (50 ft.) is an 120
Ω cable for systems equipped with an I/O
filter panel, connecting the 9 pin I/O filter connector to the 9 pin NCTE
connector.
Table 118 which follows lists the pin attributes for the NT8D7217 cable.
1 GND Shield Wire Bare N/C Case P3
1 Standard Wire (3”) Bare Case P3 P3-5
1 Standard Wire (3”) Bare Case P3 P3-9
Figure 67
NT8D7217
Table 118
NT8D7217 cable pins (Part 1 of 2)
Cable Name Description Color
DDP2
pins I/O Panel
pins
0 T-PRI0TX Trunk 0 Transmit Tip Black P1-6 P2-6
0 R-PRI0TX Trunk 0 Transmit Ring White P1-7 P2-7
0 T-PRI0RX Trunk 0 Receive Tip Black P1-2 P2-2
0 R-PRI0RX Trunk 0 Receive Ring Red P1-3 P2-3
Table 117
NTCK45AA cable pins (Part 2 of 2)
Cable Name Description Color
DDP2
pins I/O Panel
pins
553-7386
P1 P2
I/O Panel Trunk
D-type 9 pin, female Multiplexer Trunk
D-type 9 pin, male