Nortel Networks Circuit Card - Manual (Page 337)

NT5D97 Dual-port DTI2/PRI2 card Page 337 of 906
Circuit Card Description and Installation
Cable diagrams
Figure 73 on page 338 and Figure 74 on page 339 provide examples of
typical cabling configurations for the DDP2.
Figure 73 shows a typical DDP2 cabling for a system with an I/O panel, with
the connection between the I/O panel and a Network Channel Terminating
Equipment (NCTE).
Figure 74 shows cabling for a system without an I/O panel. Here, the DDP2
faceplate is cabled directly to the NCTE.
Note: Since several clock cabling options exists, none has been
represented in the diagrams. Refer to “Clock configurations” on
page 356 for a description on each available option.