Nortel Networks NN46120-104 - Manual (Page 85)

Adding Users through RADIUS 85
2: admin
3: oper
>> Groups# apply
--End--
Adding Users through RADIUS
The RADIUS system administrator can add VPN Gateway administrator
users to the RADIUS configuration without being an administrator of the
NVG, because the users do not need to be configured locally on the NVG.
By assigning suitable administrator groups to these users in RADIUS, the
users can be given the desired access rights to the CLI/BBI.
When the user logs in to the CLI/BBI and is successfully authenticated, the
RADIUS server returns the groups to which the user belongs. The groups
are compared to the fixed administrator groups on the VPN Gateway, that
is,
tunnelguard , admin , oper and certadmin . If a match is found, the
logged on user is given the administration rights pertaining to matching
group(s). Otherwise, the user is denied access.
See the /cfg/sys/adm/auth/group command in the User’s Guide.
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.