Idle timeout – Nortel Networks NN46120-104 User Manual

Page 144

144

The Command Line Interface

Idle Timeout

The VPN Gateway will disconnect your local console connection
or remote connection (Telnet or SSH) after 10 minutes of inactivity.
This value can be changed to a maximum value of 1 hour using the

/cfg/sys/adm/clitimeout

command.

If you have unapplied configuration changes when automatically
disconnected after the specified idle timeout value, the unapplied
configuration changes will be lost. Therefore, make sure to save your
configuration changes regularly by using the global

apply

command.

If you have unapplied configuration changes when using the global

exit

command to log out from the command line interface, you will be prompted
to view the pending configuration changes by using the global

diff

command. After verifying the pending configuration changes, you can
either remove the changes or apply them. For more information about
pending configuration changes, see the "Viewing, Applying and Removing
Changes " section under Configuration Menu in the Command Reference.

Nortel VPN Gateway

User Guide

NN46120-104

02.01

Standard

14 April 2008