Nortel Networks NN46120-104 User Manual
Page 159
Boot User Password
159
(
new
setup, continued)
Card 1 successfully initialized.
Should new or existing CODE iKeys be used?
(new/existi
ng) [new]:
existing
3
Transfer the cluster wrap key from the existing CODE-SO
and CODE-USER iKeys to card 0.
Make sure you use the same pair of CODE-SO and
CODE-USER iKeys that were used in the former cluster of ASA
310-FIPS devices.
(
new
setup, continued)
Verify that CODE-SO iKey (black) is inserted in card 0
(with flashing LED).
Hit enter when done.
Verify that HSM-USER iKey (blue) is inserted in card 0
(with flashing LED).
Hit enter when done.
Verify that CODE-USER iKey (black) is inserted in card 0
(with flashing LED).
Hit enter when done.
Wrap key successfully combined to card 0.
4
Transfer the cluster wrap key from the CODE-SO and
CODE-USER iKeys to card 1.
(
new
setup, continued)
Verify that CODE-SO iKey (black) is inserted in card 1
(with flashing LED).
Hit enter when done.
Verify that HSM-USER iKey (blue) is inserted in card 1
(with flashing LED).
Hit enter when done.
Verify that CODE-USER iKey (black) is inserted in card 1
(with flashing LED).
Hit enter when done.
Wrap key successfully split combined to card 1.
5
If you selected FIPS mode as the security mode, specify the
passphrase.
Enter the same secret passphrase as was defined in the former
cluster running in FIPS mode. This step only appears if you
selected FIPS mode when initializing the HSM cards.
Nortel VPN Gateway
User Guide
NN46120-104
02.01
Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.