Nortel Networks NN46120-104 - Manual (Page 107)

Create a New Certificate 107
Update Existing Certificate
Whenever you wish to substitute an existing certificate for a new
certificate, you should keep the existing certificate until it is verified that the
new certificate works as designed.
Create a New Certificate
Step Action
1 Check the certificate numbers currently in use.
>> Main# cfg/cur cert
If for example, two different certificates exist as Certificate 1 and
Certificate 2, create Certificate 3 for your new certificate.
2 Add a certificate with a new certificate number.
>> Configuration# cert
Enter certificate number: (1-1500) 3
Creating Certificate 3
3 Add the new certificate according to the instructions in
“Adding Certificates to the NVG” (page 99) .
4 Map the new certificate to the desired servers.
The following example refers to a virtual SSL server used for
SSL acceleration. To map the certificate to a portal server in a
VPN, use the
/cfg/vpn #/server/ssl/cert command.
>> Configuration# ssl/server
Enter virtual server number: (1-256) 1
>> Server 1# ssl
>> SSL Settings# cert
Current value: 2
Enter certificate number: (1-1500) 3
After you have tested that the new certificate works fine you may
delete the old certificate(s).
--End--
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.