Nortel Networks NN46120-104 - Manual (Page 72)

72 Initial Setup
(reinstall procedure, continued)
Select protocol (ftp/scp/sftp) [ftp]: ftp
Enter FTP server address: 10.0.0.1
Enter file name of boot image: SSL-7.0.x-boot.img
Enter FTP Username [anonymous]: john
Password: password
Downloading boot image...
Installing new boot image...
Done
If the FTP server does not support anonymous login, enter the
required FTP user name and password. Anonymous login is the
default option.
4 Log in to the VPN Gateway as the admin user, after the
device has rebooted on the newly installed boot image.
(reinstall procedure, continued) Restarting...
Restarting system.
Alteon WebSystems,I nc. 0004004C
Booting...
Login:
After the new boot image has been installed, the VPN Gateway
will reboot and you can log in again when the login prompt
appears. This time, log in as the admin user to enter the Setup
menu. For more information about the Setup menu.
--End--
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.