Nortel Networks NN46120-104 - Manual (Page 122)

122 Certificates and Client Authentication
>> Automatic CRL# passwd
Current value: ""
Enter password:
4 Set the time interval for retrieving CRLs from the resource
you have specified using the
url command.
If you want to specify a time interval in minutes, hours or days,
enter an integer directly followed by the letter
m, h, or d .
The default interval is 1 day ( 1d ). The shortest time interval
allowed is 601 seconds (10 minutes and 1 second).
>> Automatic CRL# interval
Current value: 1d
Enter refresh interval:
5 Specify which CA certificates are valid signers of the
certificate revocation lists you retrieve.
To get an overview over all available certificates, enter the
/info/certs command.
When specifying more than one certificate, use commas to
separate the corresponding index numbers. Example: 1,2,5
To clear all specified CA certificates, press ENTER when asked
to enter certificate numbers, then answer yes to the question if
you want to clear the list.
>> Automatic CRL# cacert
Current value: ""
Enter certificate numbers (separated by comma):
6 Enable automatic retrieval of CRLs.
>> Automatic CRL# ena
When using the apply command the first time after having
enabled automatic retrieval of CRLs, a first retrieval is invoked
immediately. After that, retrievals will occur at the specified time
interval (where the default value is once every 24 hours).
7 Apply the changes.
--End--
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.