Nortel Networks NN46120-104 - Manual (Page 154)

154 Troubleshooting the NVG
>> Main# maint/hsm/login
Verify that HSM-USER iKey (blue) is inserted in card 0
(with flashing LED).
Hit enter when done.
Enter the current HSM-USER password for card 0:
the password associated with the HSM-USER iKey for card
0>
Successful login on card 0.
Verify that HSM-USER iKey (blue) is inserted in card 1
(with flashing LED).
Hit enter when done.
Enter the current HSM-USER password for card 1:
the password associated with the HSM-USER iKey for card
1>
Successful login on card 1 .
Note: If you enter the wrong password for the HSM-USER
fifteen (15) times in a row, the HSM-USER iKey will be
rendered unusable. This is due to the strict security
specifications placed on the ASA 310-FIPS.
3 Verify that the alarms that caused the ASA 310-FIPS to stop
processing SSL traffic have been cleared.
>> # /info/events/alarms
** (alarm) Active Alarm List *************************
**************
The hsm_not_logged_in alarms that were triggered during the
reboot should now be cleared from the active alarm list, after the
successful login to both HSM cards. The ASA 310-FIPS is now
ready to process SSL traffic again.
--End--
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.