Nortel Networks NN46120-104 - Manual (Page 193)

ALARM 193
ERROR
• Config filesystem corrupt
Possible loss of configuration. Followed by the message Config
filesystem re-initialized - reinstall required or Config filesystem
restored from backup.
• Missing files in config filesystem
Possible loss of configuration. Followed by the message Config
filesystem re-initialized - reinstall required or Config filesystem
restored from backup.
•
Logs filesystem re-initialized
Loss of logs.
•
Root filesystem repaired - rebooting
fsck found and fixed errors. Probably OK.
•
Config filesystem restored from backup
Loss of recent configuration changes.
• Rebooting to revert to permanent OS version
Happens after Config filesystem re-initialized - reinstall required or
Config filesystem restored from backup if software upgrade is in
progress (that is, if failure at first boot on new OS version).
System Control Process Messages
The System Control Process messages are divided into three categories:
•
INFO
• ALARM
•
EVENT
Both events and alarms are stored in the event log file, which can be
accessed by typing the
/info/events/download command. Active
alarms can be viewed by typing the /info/events/alarms command.
INFO
System started [isdssl-]
Sent whenever the system control process has been (re)started.
ALARM
Alarms are sent at a syslog level corresponding to the alarm severity as
shown in the following table:
Alarm Severity Syslog Level
CRITICAL ALERT
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.