beautypg.com

Nortel Networks NN46120-104 User Manual

Page 103

background image

Using TFTP/FTP/SCP/SFTP to add Certificates and Keys

103

4

Apply your changes.

>> Certificate 1# apply

Changes applied successfully.

Your certificate and private key is now fully installed and ready to
be taken into use.

If the NVG software is used for SSL acceleration purposes, the
certificate should be mapped to the virtual SSL server, using the

/cfg/ssl/server #/ssl/cert

command.

If the NVG software is used for deployment of a VPN solution,
the certificate should be mapped to the portal server of the
desired VPN, using the

/cfg/vpn #/server/ssl /cert

command.

To view basic information about configured certificates, use the

/cfg/cur cert

command.

--End--

Using TFTP/FTP/SCP/SFTP to add Certificates and Keys

The following is an example of how to input a certificate into the VPN
Gateway using TFTP, FTP, SCP, or SFTP.

Nortel VPN Gateway

User Guide

NN46120-104

02.01

Standard

14 April 2008

Copyright © 2007-2008 Nortel Networks

.