Export client certificate – Nortel Networks NN46120-104 User Manual
Page 114
114
Certificates and Client Authentication
Export Client Certificate
Before you transfer the private key and client certificate to the subject,
you should save the key and the certificate to a file using the
export
or
display
command on the Certificate menu. The
export
command (see
following instruction) is recommended, as this provides you with the option
to select the PKCS12 file format (also known as PFX). Most Web browsers
accept importing a combined key and certificate file in the PKCS12 format.
This is how to export the client certificate to a TFTP/FTP/SCP/SFTP
server.
Step
Action
1
Specify the number of the certificate you wish to export.
When you generated the client certificate you had the option to
save it with a new certificate number. In the previous example
(Step 4), the client certificate was saved as certificate number
2. Enter this certificate number when prompted, then use the
export
command to export the certificate as a file.
>> Main# cfg/cert
Enter certificate number:
(1-) 2
>> Certificate 1# export
Select protocol (tftp/ftp/scp/sftp) [tftp]: ftp
Enter hostname or IP address of server: ftp.example.
com
2
Select the desired export format, enter a pass phrase and
specify the name of the output file.
Enter export format (pem/der/net/pkcs12): pkcs12
Enter export pass phrase:
Reconfirm export pass phrase:
Enter name of combined key and certificate file on
remote host:
cert.pfx
FTP User (anonymous):
Password:
sent 2392 bytes
--End--
Nortel VPN Gateway
User Guide
NN46120-104
02.01
Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.