Nortel Networks DCT1900 - Manual (Page 306)

Technical Product Manual - DCT1900
Installation Instructions, Modular Cabinet – Cables
26-2 Install-DCT1900/R8/mw
© 2000-2005
26.3 MCCB Power Cable – TRENB 101 03
The MCCB power cable (see Figure 26–2) is a 2–wire unshielded cable with connectors on both
sides. It is used to supply power from the backplane or power switch (via the piggy–back fastons)
to the MCCB which takes care of the power distribution to the CLUs and SLUs. This cable does
not need to be ordered separately. It is factory connected to the backplane/power switch.
Fig. 26–2 MCCB Power Cable – TRENB 101 03
1
2
X1
(V1)
(V0)
X2 1
2 X3
X1
X2
X3
18 in " .4 in
1
2 X1
X2 and X3