beautypg.com

Nortel Networks DCT1900 User Manual

Page 24

background image

Technical Product Manual - DCT1900

System Description, System Overview

2-2

System-DCT1900/R8/mw

© 2000-2005

Table 2-1 DCT1900 Network Signalling Summary

DCT1900

System

Type

Signalling

Format to

Network

Signalling Functionality

Provides

Connection to

Standalone

Analog

Interface is over a 3Khz analog 2-wire connection.
Basic signalling states such as on-hook, off-hook and
ringing supported by voltage and current conditions
on the line.

PBX’s

Standalone

Digital

Digital line interface over individual 2 wire connec-
tions. Proprietary digital signal encoding, which con-
veys basic call information and additional call
information such as Calling Line Identifier, Call redi-
rection numbers, message waiting indicators, multi-
line operation, etc. There are 12 circuits per board
and each circuit carries one voice call.

PBX’s

Standalone

T1 CAS

Digital trunk interface operating at 1,544,000 bits per
second supplying 24 voice channels per circuit.
There are 2 circuits per board for a total of 48 voice
channels. Signalling is done via robbed bit signalling
with 2 bits per voice circuit encoding basic signalling
states such as on-hook, off-hook and ringing.

PBX’s

Standalone

E1 CAS

Digital trunk interface operation at 2,048,000 bits per
second supplying 30 voice channels per circuit.
There are 2 circuits per board for a total of 60 voice
channels. E1 circuits use ISDN type protocol.

Ericsson MD110
proprietary

Mobility

T1 CCS or
E1 CCS

Interface over a T1 line at 1,544,000 bps or an E1
line at 2,048,000 bps. One channel on the interface
is dedicated to a digital signalling protocol operating
at 64,000 bps. The digital signalling channel carries
an ISDN type protocol, which conveys basic call
information and additional call information such as
Calling Line Identifier, Call redirection numbers,
message waiting indicators, etc. Because the
signalling channel occupies one of the time slots on
the T1 or E1 interface, a T1 CCS trunk can carry 23
voice calls per circuit and an E1 CCS trunk can carry
30 voice calls per circuit. There are two circuits per
board.

Mobility Server