Chapter 6, Relation between parts, 6relation between parts – Nortel Networks DCT1900 User Manual
Page 135: Hapter
Technical Product Manual - DCT1900
Configuration Directions, Relation between Parts
Config-DCT1900/R8/mw
6-1
© 2000-2005
C
HAPTER
6
Relation between Parts
Radio Exchange
Item Connects
Remarks
Modular Cabinet
9 System Boards
1 Connection Board
2 Power Supplies
Number of System Boards may be less due to
power limitations. Up to 4 cabinets can be chained.
An MCCB is factory mounted.
CPU
PC, Printer, General Alarm, SMS
and PWT air interface
synchronization signals
Only 1 per system (also with a multi–cabinet
system).
CPU/SDB synchronization cables.
Note: Sync Kit required for each CPU. FPGA
must be installed.
SLU 8
calls
8 Base Stations
An SLU consists of an SPU part and a CLU part.
The SLU can be combined with SPU and CLU
boards.
The SPU part provides for 8 speech paths. The CLU
part can connect 8 Base Stations.
CLU/MDF Cables and CLU/MCCB Power cables.
Quantity depends on required traffic capacity and
GOS.
DTU-E1, CCS
60 simultaneous calls
Two 2–Mbit links, each link having 30 channels to
which Portable Telephones are assigned
dynamically. The maximum number of Portable
Telephones depends on the GOS and the traffic
capacity of the RE configuration (1 per RE)
DTU-T1, CCS
46 simultaneous calls
Two 1.544-Mbits, each link having 23 channels to
which Portable Telephones are assigned
dynamically. The maximum number of Portable
Telephones depends on the GOS and the traffic
capacity of the RE configuration (1 or 2 per RE).
DTU-E1, CAS
60 individual extensions
Two 2–Mbit links, each link having 30 channels to
which Portable Telephones are assigned on a
dedicated basis. (Max. 10 per system)
DTU-T1, CAS
48 individual extensions
Two 1.544-Mbits, each link having 24 channels to
which Portable Telephones are assigned on a
dedicated basis. (Max. 13 per system)
LTU
8 PBX lines (analog, 2 wires)
LTU/MDF Cable Set- 1 cable supports 3 LTUs . A
maximum of 272 Portable Telephones supported.
DLU
12 PBX lines (1:1 digital lines)
DLU/PBX Cable Set- 1 cable supports 2 DLUs. Each
DLU supports 12 Portable Telephones.
CLU
8 Base Stations – 2.2 miles
CLU/MDF Cables and CLU/MCCB power cables.
CLU-S
8 Base Stations – 1.2 miles
SPU
8 calls
The SPU provides 8 speech paths. Quantity
depends on required traffice and GOS.
MCCB
3+7 CLU or 3+7 SLU power ports
for Base Station power
PC, Printer/SMS and General
Alarm
Modular Cabinet Connection Board
SDB
1 input and 3 output PWT air
interface synchronization
connections
To be mounted on the bottom plate of the Modular
Cabinet.