Safety warnings – Powerware 9170+ User Manual
Page 6
Introduction
2
Powerware
®
9170 User's Guide
S
LTM-1344 B Uncontrolled Copy
Safety Warnings
Read the following precautions before you install the UPS.
I
M
P
O
R
T
A
N
T S
A
F
E
T
Y I
N
S
T
R
U
C
T
I
O
N
S
SAVE THESE INSTRUCTIONS. This manual contains important instructions that you
should follow during installation and maintenance of the UPS and batteries. Please
read all instructions before operating the equipment and save this manual for future
reference.
C
A
U
T
I
O
N
S
Universal power modules (model ASY-0528) have white labels on the front and
produce a single output voltage: 208, 220, 230, or 240 Vac. Split-phase power
modules (model ASY-0567) have blue labels on the front and produce two output
voltages: 100/100 for 200, 110/110 for 220, 120/120 for 240, 120/120 for 208, or
127/127 for 220 Vac. DO NOT mix the two types of power modules in the same
Powerware 9170 cabinet.
S
Battery modules to be used in the Powerware 9170 system are model ASY-0529.
Each battery module weighs 30 lb (14 kg). Use care in lifting and moving battery
modules.
S
All input and output wiring must be copper and adequate to carrying currents as
listed in Table 13 on page 78.
S
Torque all bolts holding input and output power conductors to values specified in
Table 2 on page 27.
S
The user is required to provide power input and output disconnect devices for the
UPS. These must be within sight of the UPS and easily accessible. For a
plug-receptacle unit, the plug serves as the power input disconnect device, which
must also be readily accessible.