Printronix MVP Series User Manual

Page 64

Configuration

4–12

Option 23 — Automatic Line Feed on Carriage Return

Discussion

Carriage return (0DH) does not cause a line feed and the character line is not

printed in the default configuration. The character line must be terminated

with a Form Feed, Line Feed, or EVFU (Electronic Vertical Format Unit)

command before it is printed. In other configurations, carriage return

generates 1, 2, or 3 line feeds.

MVP/L150

Option

Number

Display

Configuration
Description

23.0

CR = 0 line feed (default)

23.1

CR = 1 line feed

23.2

CR = 2 line feeds

23.3

CR = 3 line feeds

NOTE: The Underline feature, Configuration Option 28, cannot be used if

option 23.1–.3 is selected. These options set CR equal to one, two,

or three line feeds, respectively, and cause the printer buffer

contents to be printed before the underlines can be loaded into the

buffer. The underlines are then printed one, two, or three lines

below the desired position. A line terminator other than a carriage

return (e.g, FF or EVFU terminator) must be used if 23.0 is not

selected.

150B/L150B