Printronix MVP Series - Manual (Page 179)

Interfaces 8–11
Option 62 — Data Strobe Line Polarity with Parallel Interface
MVP/L150
Data Strobe is normally a low active (negative true) signal but may be
configured to be high active (positive true).
Option
Number
Display Configuration
Description
.0 62.0 Enable negative data strobe line polarity transition (default).
.1 62.1 Enable positive data strobe line polarity transition.
150B/L150B
Option
Number
Display Configuration
Description
.0 62.0 Enable negative data strobe line polarity transition (default).
.1 62.1 Enable positive data strobe line polarity transition.