Printronix MVP Series - Manual (Page 123)

EVFU 6–11
Clearing EVFU Memory
Use one of the three following actions to clear (reset) the EVFU Memory.
• Send only the Start Load and End Load codes (no channel assignment
data).
• Send an odd number of EVFU characters (channel assignment data)
(detected after the End Load code is received). Remember, two data
bytes are required per line.
• Send a second Start Load code, which will result in reinitializing the
EVFU memory routine.
Table 6–2. EVFU Channel Instruction
Bits of Data Byte
Channel Selected PI Line 8 7 6 5 4 3 2 1
1 1 X X X 0 0 0 0 0
2 1 X X X 0 0 0 0 0
3 1 X X X 0 0 0 0 0
4 1 X X X 0 0 0 0 0
5 1 X X X 0 0 0 0 0
6 1 X X X 0 0 0 0 0
7 1 X X X 0 0 0 0 0
8 1 X X X 0 0 0 0 0
9 1 X X X 0 0 0 0 0
10 1 X X X 0 0 0 0 0
11 1 X X X 0 0 0 0 0
12 1 X X X 0 0 0 0 0
X=don’t care (1 or 0)