Printronix MVP Series - Manual (Page 232)

Appendix C–5
Paper and Ribbon Guidelines
Guidelines Characteristics/Function
Paper
Feed (For 150B: Adjustable horizontally or vertically; 600 steps per inch resolution.)
Forms Continuous, fanfold, 1 to 6 part, edge perforated, no hard material. (For 150B:
Vertically adjustable position control; pushbutton line feed and top–of–form;
programmable perforation skipover; selectable forms length in 1/2 inch intervals.)
Size 3 to 16 wide, 3 to 24 in. wide
Weight Maximum 15 to 100 lb. stock.
Labels One part, continuous perforated fanfold backing form; 3 to 16 in. wide (including the
two standard perforated tractor feed strips), and 3 to 24 in. long between top and
bottom perforations.
The maximum thickness (including backing) is 0.025.
Labels must be placed at least 1/16 in. from the fanfold perforation. Do not use labels
that have excessive adhesive that can be squeezed out during printing.
Ribbon
Type Nylon fabric, spool to spool, one inch wide by 60 yards long; Printronix P/N 102247
(Standard), P/N 102796 (OCR).