Greasing and service table – KTM Supermoto 690 User Manual
Page 55
GREASING AND SERVICE TABLE
53
*5($6,1* $1' 6(59,&( 7$%/(
Important maintenance work to be carried out by an authorized KTM workshop.
K10N
K50A
K100A
J1A
J2A
Engine
Change engine oil and oil filter, clean oil screens.
b
x
(
P. 118)
•
•
•
•
•
Check and adjust valve clearance.
b
x
•
•
Check engine mounting screws for tightness.
•
•
•
•
•
Replace spark plug.
•
Check engine bolts accessible from outside for tightness.
•
•
•
•
•
Fuel injection
Check connection boots for cracks and leakage.
b
x
•
•
•
Read out the error memory with a KTM diagnostic tool.
b
x
•
•
•
•
•
Check fuel hoses, SLS hoses and vent hoses for damage, correct fit-
ting and leaks.
b
x
•
•
•
•
•
Clean, check and grease the O-ring of the fuel hose connection.
b
x
•
•
•
•
Check the cable harness of the throttle valve body for damage and cor-
rect positioning.
b
x
•
•
•
Attachments
Check the cooling system for leakage.
•
•
•
•
•
Check the antifreeze and coolant level. (
P. 106)
•
•
•
•
•
Check the functioning of the radiator fan.
b
x
•
•
•
•
•
Check the exhaust system for leaks and correct fitting and check that
the exhaust clamps are tight.
b
x
•
•
•
•
•
Check Bowden cables for damage, smooth operation, routing without
sharp bends and setting.
•
•
•
•
•
Check/correct the fluid level of the hydraulic clutch. (
P. 114)
•
•
•
•
Check air filter and change if necessary. Clean the air filter box.
b
x
•
•
•
•
Check cables for damage and routing without sharp bends.
b
x
•
•
•
•
•
Check the headlamp setting. (
P. 104)
•
•
•
•
•