KTM Supermoto 690 - Manual (Page 31)

OPERATING ELEMENTS
29
700115-01
ದ Turn the ignition key to the position b .
ದ Press the bMODEbbutton several times until thebODO display mode is active.
ದ Keep the bMODEbbutton and thebSETbbutton pressed simultaneously.
The time begins to flash.
ದ Press the bMODEbbutton to adjust the hour.
ದ Press the bSETbbutton to adjust the minute.
ದ Keep the bMODEbbutton and thebSETbbutton pressed simultaneously.
The time is set.
Combination instrument - bODO display
700120-01
In bODO mode, the total distance covered is shown in kilometers or miles.
Info
This value remains intact even if the battery is disconnected and/or the fuse blows.
Combination instrument - setting/resetting bTRIPb1 display
Info
The tripmaster bTRIPb1 operates constantly and counts up tob999.9.
You can use the tripmaster to measure trips or the distance between refuelling stops. After reaching 999.9, the tripmaster begins
again at 0.0.