Sony DVS-9000 - Manual (Page 262)

Chapter 6
DME Wipes
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB08C06-WW.fm masterpage:Left
262
Basic Procedure for DME Wipe Settings
DVS-9000/9000SF
3-704-674-01 (1)
2
In the group, select the edge type.
Border: border
Soft Border: soft border
3
Set the parameters according to the selection in step 2 .
• When border is selected
• When soft border is selected
Setting the DME wipe position (Positioner)
Use the following procedure.
1
In the M/E-1> DME Wipe menu, select HF5 ‘Modify.’
The Modify menu appears.
2
In the group, press [Position], turning it on.
3
Set the following parameters.
To return the DME wipe pattern position to the center of the screen
In the group, press [Center].
Knob Parameter Adjustment Setting values
1 Width Border width 0.00 to 100.00
3 Luminance Luminance 0.00 to 100.00
4 Saturation Saturation 0.00 to 100.00
5 Hue Hue 0.00 to 359.99
Knob Parameter Adjustment Setting values
1 Width Border width 0.00 to 100.00
2 Inner Soft Border inner softness 0.00 to 100.00
3 Luminance Luminance 0.00 to 100.00
4 Saturation Saturation 0.00 to 100.00
5 Hue Hue 0.00 to 359.99
Knob Parameter Adjustment Setting values
1 H Horizontal position
−
200.00 to +200.00
2 V Vertical position
−
200.00 to +200.00