Configuring an ip address for the stb nip 2212 – Schneider Electric 890USE17700 User Manual
Page 72
STB NIP 2212 Web Server
72
890USE17700 April 2004
Configuring an IP Address for the STB NIP 2212
Introduction
To communicate as a node on the Internet, the fieldbus (Ethernet) port on the
STB NIP 2212 must be configured with a valid IP address. The IP address must be
unique on the Ethernet LAN on which the STB NIP 2212 resides.
One of the available IP address assignment methods (See How the STB NIP 2212
Obtains IP Parameters, p. 60) is to configure an IP address yourself. A customer
configured IP address is set up on the Configured IP web page.
Sample
Configured IP
Web Page
A sample Configured IP web page appears in the following figure: