Schneider Electric 890USE17700 User Manual
Page 51
Configuring the Island Bus
890USE17700 April 2004
51
Installing the
Card
Use the following procedure to install the card:
Step
Action
1
Punch out the removable memory card from the plastic card on which it is
shipped.
Make sure that the edges of the card are smooth after you punch it out.
2
Open the card drawer on the front of the NIM. If it makes it easier for you to work,
you may pull the drawer completely out from the NIM housing.
3
Align the chamfered edge (the 45° corner) of the removable memory card with
the one in the mounting slot in the card drawer. Hold the card so that the chamfer
is in the upper left corner.
4
Seat the card in the mounting slot, applying slight pressure to the card until it
snaps into place. The back edge of the card must be flush with the back of the
drawer.
5
Close the drawer.
removable memory card