Schneider Electric 890USE17700 - Manual (Page 163)

Advanced Configuration Features
890USE17700 April 2004 163
Saving Configuration Data
Introduction The Advantys configuration software allows you to save configuration data created
or modified with this software to the NIM’s Flash memory and/or to the removable
memory card (See Physical Description, p. 50). Subsequently, this data can be read
from Flash memory and used to configure your physical island.
How to Save a
Configuration The following procedure describes the general steps to use to save a configuration
data file to either Flash memory directly or to a removable memory card. For more
detailed procedural information, use the configuration software’s online help feature:
Note: If your configuration data is too large, you will receive a warning message
when you attempt to save it.
Step Action
1 Connect the device running the Advantys configuration software to the CFG port
(See The CFG Interface, p. 33) on the NIM, and launch the software.
2 Download the configuration data that you want to save from the configuration
software to the NIM. Then, use one of the following commands from the
configuration software’s Online menu:
z To save to the NIM’s Flash memory, use the store to Flash command.
z To save to a removable memory card, first install the card (See Installing the
Card, p. 51) in the host NIM, then use the store to removable memory card
command.