Schneider Electric 890USE17700 - Manual (Page 34)

The STB NIP 2212 NIM
34 890USE17700 April 2004
Connections An STB XCA 4002 programming cable must be used to connect the computer
running the Advantys configuration software or a Modbus-capable HMI panel to the
NIM via the CFG port.
The following table describes the specifications for the programming cable:
Parameter Description
model STB XCA 4002
function connection to device running Advantys configuration
software
connection to HMI panel
communications protocol Modbus (either RTU or ASCII mode)
cable length 2 m (6.23 ft)
cable connectors eight-receptacle HE-13 (female)
nine-receptacle SUB-D (female)
cable type multiconductor