Siemens SIMATIC PANEL PC 877 - Manual (Page 95)

Operation
10.3 Device with key panel
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
10-7
Numeric keys
Enter the numerals "0" to "9" and special characters, e.g. the decimal point, using the pre-
defined assignment of the numeric keys.
Figure 10-6 Numeric keys
Enter special characters, arithmetic signs and signs
Special characters, arithmetic signs and signs are also assigned to most of the alphanumeric
and numeric keys. These signs are indicated by white symbols on the top left of the keys. To
enter such a sign, proceed as follows:
1. Hold down the key.
2. Activate the desired alphanumeric or numeric key at the same time. The displayed
special character, arithmetic sign or signs will be entered.
3. To enter the signs of the pre-defined assignment again, release the key.