Siemens SIMATIC PANEL PC 877 - Manual (Page 56)

Commissioning
8.2 Switch on the device
SIMATIC Panel PC 877
8-2
Operating instructions, Release 07/2006, A5E00877780-01
8.2
8.2
Switch on the device
Procedure
1. Plug the power plug of the supplied power supply cable in the AC/DC power supply
connector of the computer unit.
2. Lock the power plug in place.
3. Plug the power supply cable of the computer unit into a socket with a grounded protective
conductor.
4. Switch on the computer unit at the power switch.
The "POWER" LED will light up. The device starts up and boots.
Self Test
After connection to the power supply, the device performs a self test. During the self test,
the message "Press F2 to enter SETUP" appears briefly.
When the self-test is finished, the operating system will be loaded.