Siemens SIMATIC PANEL PC 877 - Manual (Page 244)

Detailed descriptions
17.6 BIOS setup
SIMATIC Panel PC 877
17-52
Operating instructions, Release 07/2006, A5E00877780-01
Settings in the Advanced menu
Plug&Play means that all modules are automatically detected and installed,
providing they support the Plug&Play functionality.
[Other]
BIOS handles the entire Plug&Play capability, default setting.
[Win95] BIOS handles the entire Plug and Play capability
[Win98] The operating system handles some of the Plug&Play functions.
[WinMe] The operating system handles the Plug&Play functions.
Installed O/S
[Win/2000/XP] The operating system handles the Plug&Play functions.
[Yes]
All installations under Plug and Play are deleted and the
configuration is retriggered the next time the system boots. The
entry is then reset to [No]. System components that do not support
Plug&Play have to be entered manually.
Reset
configuration
data
[No] The Plug&Play system components are initialized after the next
system start.
[Primary]
[Secondary]
One IDE interface for max. two drives.
[Primary &
Secondary]
Two IDE interfaces for max. four drives.
Local bus IDE
adapter
[Disabled] No local IDE interface.
[DOS] The drive tables are adapted for DOS access operations in
accordance with Enhanced IDE.
Large disk
access mode
[OTHER] The tables are not adapted.
USB boot: This function defines whether the operating system can be booted from a USB
device.