Siemens SIMATIC PANEL PC 877 - Manual (Page 103)

Operation
10.3 Device with key panel
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
10-15
Procedure
1. Label the DIN A4 film with a laser printer, for example, using the print format templates for
MS Word on the Documentation and Drivers CD.
2. Cut the labeling strips along the pre-printed lines.
Note
Do not insert handwritten labeling strips until the ink has dried.
3. Insert the labeling strips into the slots provided on the rear side of the control unit.
Figure 10-10 Rear side of the control unit with connections and slots for the labeling strips for the
example of a 12" touch panel front.
1 Slots for long labeling strips, vertical keypads
2 Slots for short labeling strips, horizontal keypads
3 Slots for labeling strips, horizontal keypads