Siemens SIMATIC PANEL PC 877 - Manual (Page 61)

Commissioning
8.4 Installing applications and drivers
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
8-7
Setting the key panel
This section applies only to control units with key panels.
6. Click on "Finish" to end the Panel Wizard.
Figure 8-5 Keyboard panel, end Panel Wizard
7. Exit the operating system session and restart the device. Otherwise the "Security
features" from "KeyTools" will not be activated.
Warning
Use "KeyTools" as described in the "Additional drivers and applications/KeyTools (for
device with key front only)" section of the "Operation and configuration" chapter.
The following applies when the "Security features" of "KeyTools" is deactivated:
When the additional function keys F13 and S16 are used, or when using your own key
code table, serious malfunctions of the user software can occur because the key codes
behind the function keys can also be activated by activating keys other than the
configured ones. Further information is available in the description of "KeyTools" on the
supplied "Documentation and Drivers" CD.
8. No administrator password is assigned in the factory state. When the logon dialog
appears the next time the device starts up, therefore, leave the field empty and close the
dialog with the "OK" button.
Notice
Then configure an administrator password for security.