Siemens SIMATIC PANEL PC 877 User Manual
Page 237
Detailed descriptions
17.6 BIOS setup
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
17-45
"Boot options" field
The following context menu appears when you select “Boot options” in the main menu:
Figure 17-6 "Boot Options" field
Quick Boot Mode
Some hardware tests are skipped to speed up the boot sequence.
SETUP prompt
During the system load phase, the message
Press
is output on the bottom of the screen.
POST errors
The boot sequence is stopped if an error is detected; you must press F1 to
acknowledge. Enter "Disabled" to avoid the necessity of acknowledging errors,
for example, if no keyboard is connected.
Floppy check
The floppy head is stepped inward and then back to its original position during
the system boot phase. This test is useful because it reinitializes the drive.
Summary screen
The most important system parameters are displayed when the system boot
phase completes.
'Enabled' means that the feature is active. 'Disabled' means that the feature is inactive.