Siemens PC 670 User Manual
Panel pc 670 computing unit, Simatic pc
Connecting and Switching on the
Computing Unit
Maintaining and Extending the
Computing Unit
Configuring the Computing Unit
in BIOS Setup
Appendices
Release 04/02
Panel PC 670
Computing Unit
Equipment Manual
SIMATIC PC
This manual is only valid for computing units
with Order No. 6AV77xx-...
Table of contents
Document Outline
- Back to home
- Panel PC 670 Computing Unit
- Preface
- Contents
- 1 Product Overview
- 2 Starting Up the Computing Unit
- 3 Connecting and Switching on the Computing Unit
- 3.1 View of Interface Side
- 3.2 View of Drive Side
- 3.3 Connecting Periphery Units
- 3.4 Working with PC Cards
- 3.5 Drives
- 3.6 Backup Battery
- 3.7 Using the Computing Unit in a SIMATIC S5 Network
- 3.8 Using the Computing Unit in a SIMATIC S7 Network (MPI/DP)
- 3.9 Networking the Computing Unit and Other Nodes via PROFIBUS
- 3.10 Networking Computing Unit and Other Computers via Industrial Ethernet
- 3.11 Connection Using Windows
- 4 Maintaining and Extending the Computing Unit
- 4.1 Opening the Unit
- 4.2 Installation of a Memory Extension
- 4.3 Replacing the Backup Battery
- 4.4 Installation of Extension Modules
- 4.5 Removing and Installing Drives
- 4.6 Removing and Installing the Power Supply
- 4.7 Removing and Installing the Bus Board
- 4.8 Removing and Installing the Motherboard
- 4.9 Removing and Installing the Fan
- 4.10 Processor Upgrade
- 4.11 Reset button
- 5 Configuring the Computing Unit in BIOS Setup
- 6 Fault Diagnosis
- 6.1 Problems Using External Modules
- 6.2 External Screen Remains Dark
- 6.3 Display on the External Screen Does Not Appear or Scrolls
- 6.4 No Mouse Pointer Appears on the Screen/Display
- 6.5 Computing Unit Time and/or Date are Not Correct
- 6.6 USB Device Does Not Work
- 6.7 Error Message Appears on the Screen/Display
- 6.8 Computing Unit Self-Test Prior to Booting
- 7 Hardware Information
- 8 Distributed configuration
- A Technical Data
- B ESD Guidelines
- C SIMATIC HMI Documentation
- Glossary
- Index