Siemens SIMATIC PANEL PC 877 - Manual (Page 27)

Application planning
4.3 Device identification data
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
4-3
4.3
4.3
Device identification data
Procedure
1. Write down the Microsoft Windows Product Key of the Certificate of Authenticity COA in
the table at the end of this section. The COA label is only present in preinstalled Windows
2000 Professional or XP Professional and is affixed to the back of the device. You will
need the product key during the reinstallation of the operating system.
Figure 4-1 COA label, example
2. Write down the manufacturer's number SVP and the order number, for example "6AV...",
and enter it in the table. If repairs are necessary, the device can be identified by the
service center on the basis of the SVP number and order number.
Both numbers are located on the rating label on the computer unit at the top of the fan
side.
Figure 4-2 Panel PC 877 rating plate, example
3. Enter the Ethernet address of the device: The Ethernet address is located in the "Main"
menu of the BIOS setup, "Hardware Options > Ethernet Address."
Identification Number
1 Microsoft Windows Product Key COA
2 SVP number
3 Order number of the device
4 Ethernet address