Sierra Wireless EV-DO - Manual (Page 36)

PinPoint-E EV-DO
31 20070914
method is recommended only in situations where the Setup
Wizard is not available and/or when the configuration for the
PinPoint‐E is unusual.
Caution: It is not possible to activate the PinPoint-E using either
AceManager or AceNet.
1. Set telnet timeout in to 20 minutes.
AT*TELNETTIMEOUT=20
2. Save the telnet setting.
AT&W
3. Verify ALEOS has established communication to the
internal hardware.
ATI3
4. Enter the activation command appropriate for your type of
account. The SID and NID are optional and only required
if your account type uses them.
· If you have the same number for the MIN and MDN or
MSID:
AT*PROVISION=MSL,MDN[,SID,NID]
· If you have the different numbers for the MIN and MDN
or MSID:
AT*PROVISION2=MSL,MDN,MIN/MSID[,SID,NID]