Sierra Wireless EV-DO - Manual (Page 153)

Configuration Commands
Rev 3.0B Feb.08 148
• n=1 : Log client events (default)
• n=2 : Log server events
• n=3 : Log client and Server events
PinPoint (GPS)
This group includes commands specific to GPS features and
the PinPoint‐E
Figure 1-18: AceManager : PinPoint
DTRI=n
Enable monitoring the DTR signal as in input event.
• n=0 : Disable DTR input monitoring.
• n=1 : Enable DTR input monitoring.
Caution: If DTR is used as an input, DTR cannot be used for low-
power control.
GPSn
Send NMEA GPS strings out serial link. ATGPS (no parameter)
will cause the NMEA GGA, RMC, and VTG GPS strings to
output to the serial port one time. Not available in AceManager.