Sierra Wireless EV-DO - Manual (Page 126)

PinPoint-E EV-DO
121 20070914
Z
Reset the PinPoint‐E. In AceManager, this command is
performed with the Reset option on the toolbar.
Tip: *DATZ=1 will disable Z.
&W
Writes all changed modem settings. If this command is not
issued, any modified values will revert back to their previous
values at modem reset. Cannot be configured in AceManager.
*DATE=[mm/dd/yyyy],[hh:mm:ss]
Sets and queries the internal clock. Either the date and time
can be specified, or simply one of the two can be specified in
which case the unspecified value will remain unchanged. The
date and time are always specified 24‐hour notation.
• mm/dd/yyyy=date in month/day/year notation
• hh:mm:ss=time in 24‐hour notation
Note: In PinPoint line modems, the GPS will be used to set the time,
in which case any date/time specified by this command will be
ignored.
*DPORT=n
The modemʹs Device Port which the modem is listening on for
inbound packets/data/polls. Can also be set with the command
S110.
• n=1‐65535
*HOSTPAP=n
Use PAP to request the user login and password during PPP
negotiation on the host connection.
• n=0 : Disable PAP request (Default).
• n=1 : Takes user login and password from Windows DUN
connection and copies to *NETUID and *NETPW.
*NETALLOWZEROIP=n
Allows the displayed IP address in *NETIP to end in zero (ex.
192.168.1.0).
• n=0 : Do not allow.
• n=1 : Allow.