A: configuration commands, Info (information), Configuration commands – Sierra Wireless EV-DO User Manual
Page 117: Appendix a
Rev 3.0B Feb.08
112
A
A: Configuration Commands
•
•
•
•
•
•
The configuration commands (AT commands) in this chapter
are arranged according to their placement in AceManager.
The commands available in AceManager will depend of the
model number of your PinPoint‐E and, in some cases, the
version of the ALEOS firmware installed.
Note: Some commands can only be configured using a terminal
emulation and typed AT commands. Some commands also require
PassThru mode.
Tip: You can use a fully qualified domain name instead of an IP
address for most configuration options calling for an IP address if your
PinPoint-E is configured to use DNS. DNS settings frequently come
directly from Verizon while your PinPoint-E is registering on the
cellular network and receiving it’s IP address.
Info (information)
The commands in the “Info” group have read‐only param‐
eters. They only provide information about the modem. Some
of the information displayed in this group does not correspond
directly to AT commands.