Sierra Wireless EV-DO - Manual (Page 125)

Configuration Commands
Rev 3.0B Feb.08 120
DS=n
Allows a PPP connection to be initiated on the host port.
• n=2 : Initiates the PPP connection.
Cannot be configured in AceManager.
Hn
Hang‐Up Command.
• n=1 : Hang‐up
With an AT telnet connection, this command will terminate the
host data mode and return the PinPoint‐E to an AT mode.
Cannot be accessed in AceManager.
O
Online (Remote): Causes the Raven to go from Command State
to data state. Cannot be configured in AceManager.
OPRG=n
Enables/disables over‐the‐air firmware upgrading of the
PinPoint‐E. When Sierra Wireless releases a new version of
ALEOS, you can upgrade your remote modems with OPRG
enabled.
• n=0 : Disables
• n=1 : Enables
S53=[method][d.d.d.d][/ppppp]
Destination IP address, port, and method. These are used as
defaults for the D (Dial) AT command.
• method= P : UDP
• method=T : TCP
• method=N : Telnet
• d.d.d.d=IP address or domain name
• ppppp=the port address
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
Telnet to the specified IP at port 12345.
ATS53=192.168.100.23/12345
Query the specified IP at port 12345.
ATS53=/12345
Query port 12345.