Sierra Wireless EV-DO - Manual (Page 100)

Global Positioning System (GPS)
Rev 3.0B Feb.08 95
cally be used. S53, in AceManager, is part of the Misc
group.
Figure 9-26: AceManager : Misc - S53 Port
b. Set the Local Report Type, *PPLATSR, to your
preferred NMEA sentence format.
Figure 9-27: AceManager : PinPoint - *PPLATSR
• E0 ‐ NMEA GGA and VTG sentences.
• E1 ‐ NMEA GGA, RMC, and VTG sentences.
c. Set Local Reporting Time Interval, using *PPLATS, to
the number of seconds you want as an interval
between reports being sent.
Figure 9-28: AceManager : PinPoint - *PPLATS
Streaming Messages (Local)
The PinPoint‐E can be configured to send standard NMEA
messages (sentences) in ASCII over the serial port without a
PPP connection to the local computer.
Send the command ATGPS1 to the serial port to begin the
NMEA stream. The example below shows the stream in
HyperTerminal connecting directly to a PinPoint‐E via the
comport. To stop the stream, use the command ATGPS0 (this
can be entered even while data is streaming).