Sierra Wireless EV-DO - Manual (Page 147)

Configuration Commands
Rev 3.0B Feb.08 142
*IPPINGADDR=[d.d.d.d][name]
Set the IP address or valid internet domain name for the
PinPoint‐E to ping to keep itself alive (online). *IPPING must
to be set to a value other than 0 to enable pinging.
• d.d.d.d=IP address
• name=domain name
*MSCIUPDADDR=name[/port]
Modem Status Update Address ‐ where Name/Port is the
domain name and port of the machine where the modem
status updates will be sent. The status parameters of the
PinPoint‐E are sent in an XML format.
• name=domain name
• port=port
*MSCIUPDPERIOD=n
Modem Status Update Period ‐ where n defines the update
period in seconds.
• n=0 : Disabled.
• n=1‐255 seconds
*NETWDOG=n
Network connection watchdog: The number of minutes to wait
for a network connection. If no connection is established
within the set number of minutes, the PinPoint‐E modem
resets.
• n=0 : Disabled.
• n=minutes : Default = 120 min.
*RESETCFG
Wipe the non‐volatile data in the modem. Cannot be used with
AceManager.
Caution: You may need to reactivate your modem if you erase the
non-volatile data.
*SNMPCOMMUNITY=string
The SNMP Community String acts like a password to limit
access to the modem’s SNMP data.
• string =string of no more than 20 characters (default =
public).