Activating using at commands, Activating using at, Commands – Sierra Wireless EV-DO User Manual
Page 35
Activating your PinPoint-E on the Verizon Network
Rev 3.0B Feb.08
30
Figure 3-11: Setup Wizard : Primary and Secondardy HA
•
HA Shared Secret Password is used for both Home
Agent’s. This may be filled in for you with a password
created for your PinPoint‐E for the Verizon network.
•
The AAA/Vision Password is required by the Authenti‐
cation, Authorization and Accounting server. This may be
filled in for you with default for Verizon.
Figure 3-12: Setup Wizard : Passwords
When the Private Networking Data Link configuration is
completed, the connection to the network will be tested again.
Activating Using AT Commands
An alternate method to configure and activate your PinPoint‐E
is by using AT commands sent directly to the modem with a
terminal application (refer to the troubleshooting section). This