Sierra Wireless EV-DO - Manual (Page 28)

PinPoint-E EV-DO
23 20070914
Note: If you were able to successfully activate your PinPoint X with
Automatic Activation, you do not need to use the Setup Wizard to
activate your modem.
Setup Wizard
You can find the Setup Wizard installation on the CD which
came with your PinPoint‐E or on the Sierra Wireless website:
http://www.sierrawireless.com/support/AirLink/
default.aspx.Use only the Setup Wizard for Verizon for best
results.
Note: The Setup Wizard
requires the Microsoft .NET
framework v. 1.1 and Microsoft
Windows 98, Windows 2000,
Windows XP, or later. You can
obtain .NET from Microsoft: http:/
/www.microsoft.com.
1. Wizard: Starting the Setup Wizard
a. Connect the PinPoint‐E to your computer using an
Ethernet cable or a serial cable.
b. Connect the power adapter and antenna to your
PinPoint‐E.
c. Install the Setup Wizard by running VerizonSetup‐
Wizard.exe and follow the prompts.
d. Run the Setup Wizard from the Windows Start menu.
Start>All Programs>AirLink Communications>Setup
Wizard>Setup Wizard
Figure 3-1: Setup Wizard