Sierra Wireless EV-DO - Manual (Page 152)

PinPoint-E EV-DO
147 20070914
Figure 1-17: AceManager : Logging
*DBGCOMMLVL=n
Set the logging level for the host or module COM port.
• n=0 : No logging
• n=1 : Host COM Port
• n=2 : Module COM Port
*DBGDHCPLVL=n
Enable or disable internal DHCP logging.
• n=0 : No logging
• n=1 : Log DHCP events.
*DBGETHLVL=n
Sets the logging level for the Ethernet port.
• n=0 : No logging
• n=1 : Log errors: invalid/corrupt packets, etc.
• n=2 : Log the header of all received packets. Note that this
can quickly exhaust available space for the event log.
*DBGIPLVL=n
Sets the logging level for the IP subsystem.
• n=0 : No logging
• n=1 : Log errors (i.e. invalid/corrupt packets, etc.).
• n=2 : Log the header of all received packets. Note that this
can quickly exhaust available space for the event log.
• n=3 : Log the header of all received and sent packets. Note
that this can quickly exhaust available space for the event
log.
*DBGPPPLVL=n
Sets the logging level for the PPP stack.
• n=0 : No logging