Sierra Wireless EV-DO - Manual (Page 30)

PinPoint-E EV-DO
25 20070914
If you connected your PinPoint‐E to the serial port on your
computer, select Connected to a Serial Port, check Auto Detect
Port Settings or select the port from the drop down menu.
Click Next.
Figure 3-4: Setup Wizard : Serial Connection
Note: You cannot activate with serial and would need USB/net to use
set up wizard.
After the Setup Wizard connects to your PinPoint‐E, the details
for your specific model will be displayed. If the incorrect
model is displayed, press the Reset Button on your PinPoint‐E
so the Wizard can attempt to connect again. Click Next.
Figure 3-5: Setup Wizard : Connected
3. Wizard: Selecting Tasks
After the Wizard detects your PinPoint‐E, you will be offered a
menu of Setup tasks. Choose the tasks you need from those
displayed.