Sierra Wireless EV-DO - Manual (Page 16)

Introduction to the PinPoint-E
Rev 3.0B Feb.08 11
Figure 1-3: AceManager
Simplified Deployment
AceManger provides the ability to remotely set up and
configure your Sierra Wireless AirLink products. Remote
device setup and configuration reduces the deployment
timeline of your wireless solution and provides a quicker path
to ROI.
Templates allow you to easily configure other devices in your
fleet with identical settings, ensuring a simple, accurate
deployment.
Monitor and Control
AceManger allows an administrator to remotely monitor a
modem’s status, health and configuration settings. The user
interface displays signal strength, cell site information, byte
counters and error conditions, enabling you to pinpoint any
issues and troubleshoot immediately.
AceManager enables remote configuration and parameter
settings to be changed or reset instantly over the air, change a
device’s port configuration, IP address settings, GPS settings,
and much more. After configuring one modem, use the
template feature to copy that device configuration to other
modems.
Tip: Configuration steps and examples in this guide use
AceManager.