Sierra Wireless EV-DO - Manual (Page 138)

PinPoint-E EV-DO
133 20070914
*DNSUSER=d.d.d.d
Sets a user‐provided DNS to query first when performing
name resolutions in the modem.
• d.d.d.d=IP address of domain server
Dynamic IP
This group includes commands specific to dynamic DNS.
Dynamic DNS allows the PinPoint‐E to use a dynamic IP
address account, with an IP address that can change each time
you connect, and still allow you to use a fully qualified domain
name to contact the PinPoint‐E using IP Manager running on a
server with a dynamic DNS updater.
Figure 1-10: AceManager : Dynamic IP
*DOMAIN=name
Domain (or domain zone) of which the PinPoint‐E is a part.
This value is used during name resolutions if a fully qualified
name is not provided and also for DNS updates. This value can
be up to 20 characters long.
• name=domain name (i.e. eairlink.com)
If *DOMAIN=eairlink.com, then when ATDT@remote1 is
entered, the fully qualified name remote1.eairlink.com will be
used to perform a DNS query to resolve the name to an IP
address.
Tip: Only letters, numbers, hyphens, and periods can be used in a
domain name.