IBM RS/6000 User Manual
Page 137
2. If any ISA adapter is installed, enter the command:
lsresource -l bus -a | grep bus_io
This command generates a list of adapters using bus I/O that looks similar to
the following:
O
fda
bus_io_addr
x
3f - x
3f5
O
fda
bus_io_addr2
x
3f7
O
ppa
bus_io_addr
x
3bc - x
3be
O
sa
bus_io_addr
x
3f8 - x
3ff
O
sa1
bus_io_addr
x
2f8 - x
2ff
O
sioka
bus_io_addr
1
x
6
O
sioma
bus_io_addr
1
x
6
O
ampx
bus_io_addr
x
2a - x
2a6
O
sa2
bus_io_addr
x
1 4 - x
1 7
O
scsi
bus_io_addr
x
f
- x
f ff
O
scsi1
bus_io_addr
x 1
- x 1
ff
3. Select a Bus I/O Address that is not currently in use.
4. Install the 128-Port Asynchronous ISA Adapter device driver and diagnostic by
choosing:
smit isa
Install ISA Adapter Software
to install the fileset
device.isa.cxia128.
5. After installing the software, you might enter:
smit isa
Add an ISA Adapter
6. Select cxia isa IBM 128-Port Async, EIA-232 (ISA) from the SMIT pop-up
menu.
7. Select bus1 Available ISA Bus from the following SMIT pop-up menu.
8. From the menu described in Figure 37 on page 114, select the correct Bus I/O
Address, and press Enter.
Chapter 6. Adapter and Device Configuration on PCI-Based RS/6000 Servers
113